Goat Mini Milker -Single Cluster

  • £1,170.00
VAT Included

 Milking Machine Information

  • Robust and durable construction
  • “Handy”, stable and manoeuvrable design
  • UK plug
  • 25ltr stainless steel bucket with clear lid to aid inspection
  • Non Return Valve fitted in lid, preventing milk entering vacuum pump

* Please note, the spares available on the website are for the carbon vane model. Full range of spares are available for this machine - please enquire.

    This portable milker has its own vacuum system, pulsation, milk reception/storage and milking equipment, all on a frame that can be easily transported and used wherever the animal is situated. 

    This machine is oil lubricated. This will need to be topped up from time to time and the oil level in the reservoir must be checked regularly. You must also ensure the correct grade vacuum oil is used (ISO HFV 46).

    This model is manufactured on a wheeled frame that allows the user to safely wheel the machine to the animal.

    The machines are well balanced to permit stable transport over uneven ground when they are fully laden following milking.

    Each machine will have a gauge to display the vacuum level and a regulator to adjust the vacuum level and a pulsator. The pulsator is pneumatic and operates from the vacuum supply; it is important that the operator realises that the pulsation speed depends on the vacuum level. It is therefore important to set and regularly check the vacuum level and pulsation rate. Care must also be taken to minimise the amount of air that is admitted via the teat cups while the cluster is being applied to the animal, as it is easy for the operator to think the pulsator is not working properly until the vacuum has returned to the correct operating level.

    If the animal is normally milked in a milking parlour as much attention as possible should be paid to minimising any differences. If vacuum, pulsation and liners are similar enough to the parlour it will help to reduce further stress on the animal.

    While milking or washing it is vitally important that the bucket is not allowed to overfill, allowing liquid to enter the vacuum tank and if not careful then into the vacuum pump itself.

    As with all equipment routine maintenance is essential. With portable milker’s it is important to ensure that all liners, gaskets and tubing are maintained in good condition. The vacuum supply tube from the machine to the buckets and the inside of the vacuum tank itself will require regular inspection and cleaning using a tube brush where necessary. Occasional inspection by a qualified milking machine engineer is advisable to ensure optimum performance is obtained. Milking liners will need to be changed every 2500 milking’s or every 6 months whichever comes first.

    If washed, stored and maintained properly the  portable milking machines are extremely reliable, surprisingly quiet and provide a very valuable piece of equipment to both large farms and home users.

    This machine can also be set up for sheep - please specify as it will require different liners and pulsator settings.